Skip to main content
CUTSHEAR
BASIC

JCS3-75C

EXCELLENT CUT QUALITY

Basic knife holder with dovetail bar and mechanical locking. Knife overlap adjustment & cant angle adjustment with graduated scale to achieve the optimum setting for your material. Most suited to applications where slit width changes are minimal. Can be used to replace some old series knife units.

FEATURES
1. Knob with pinion for positioning and side force setting.
2. Knifeholder head with blade.
3. Knob for overlap setting.
4. Cant angle setting.
5. Quick change bayonet knife locking. 6. Frontal head extraction (180° head rotation).
7. Guide bar with single linear slide and full width rack..
8. Single linear bearing.
9. Individual pneumatic brake.
10. Automatic safety guard.

TECHNICAL SPECIFICATIONS

MIN. SLIT
75mm
BLADES
ø130 - ø150
MAXIMUM SPEED
800 mpm
TYPE OF GUIDE
4.318.E

MATERIALS

PAPER
≤ 800 gsm
LAMINATE
≤ 800 gsm
PLASTIC FILM/SHEET
≤ 1,2 mm
NONWOVEN
≤ 800 gsm
TEXTILE
CHIEDERE
ALUMINIUM
300 micron
RUBBER
CHIEDERE
FIBERGLASS
≤ 700 gsm
5
9 10
* Higher, ask for feasibility
*** Speed depends on bottom knife diameter
PHOTOGALLERY
 
 
 
 
 
 
 
 
1
1
VIDEO
SHEAR CUTTING

Main Features

OVERLAP SETTING
BLADE STROKE REGULATION
CANT ANGLE
EASY SETTING FOR ALL MATERIALS
SIDE FORCE
BLADE AXIAL LOAD
HEAD EXTRACTION
FAST AND EASY
HEAD ROTATION
180°
BLADE CHANGE
EASY AND FAST
SAFETY
360°
POSITIONING KNOB
COMPLETE WITH PNEUMATIC BRAKE

Subscribe and never miss out

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

YOUR PARTNER IN SLITTING

© 2024 Elio Cavagna S.r.l.. All rights reserved.
Via Giuseppe Curioni, 1 - 26832 Galgagnano (LO)
VAT ID IT04587620156
PRIVACY POLICY   |   COOKIE POLICY

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.